Exterior Linear Slat Modular Panels

Create spaces of unsurpassed beauty and character with TerraMai Exterior Modular Panels; reclaimed and sustainable wood on a marine grade plywood backer. Installation is quick, easy, and stays true to your design intent. Our Exterior Modular Panels will dramatically reduce your installation time for faster project completion, and may be used as exterior cladding. 

Species: Angelique, Ipe, Lost Coast Redwood, Rock Walnut, Teak, & Western Red Cedar

Construction: 1-1/4” wide x 3/4” deep slats spaced 3/4” apart, installed on 1/2" marine grade, 5-ply plywood. Slat rows are fabricated with one or two pieces per row, or two or three for Lost Coast. Plywood stained black with exterior grade, low-VOC stain.  *Lost Coast Redwood slat thickness is 5/8" (16mm).

Net Dimensions: 1-1/4" (32 mm) thick x 22" (559 mm) face width x 8' (2,438 mm) fixed lengths.  *Lost Coast Redwood overall panel thickness is 1-1/8" (29mm).

Millwork: Surfaced four sides (S4S), square edge.

Finish: Varies by species and/or preference.

Character: Varies by species. See chart below for details.

Species Character
Angelique Very clean mixed grain with an occasional pin knot and/or marine borer hole up to 1/16" (1.5mm).
Ipe Very clean mixed grain with an occasional pin knot and/or marine borer hole up to 1/16" (1.5mm).
Lost Coast Redwood May include unfilled nail and other holes, black oxide stains, surface seasoning checks, sound tight knots and other signs of prior history and age.  
Rock Walnut Very clean mixed grain with an occasional pin knot and/or marine borer hole up to 1/16" (1.5mm).
Teak Insect, fastener and other holes (including mortise pockets) filled with teak and black epoxy and/or black epoxy. Meets TerraMai Select Grade Teak Specifications.
Western Red Cedar Mixed grain with missing and tight knots and occasional surface seasoning checks.

Certifications: FSC Mix 0% to 44% depending on species - FSC-C021798

Contributes to:LEED V4

Low-Emitting Materials (Possible 3 Points)

Responsible Sourcing of Raw Materials (1-2 Points)

Contact Us