EXTERIOR SQUARE SLAT OPEN PANELS

Create amazing spaces of unsurpassed beauty and character with TerraMai’s Exterior Open Panels; reclaimed and sustainable wood slats on cross rails of the same species. Installation is quick, easy, and stays true to your design intent. Our Exterior Open Panels will dramatically reduce your installation time for faster project completion.  Exterior Open Panels must be installed on existing cladding or used as divider panels.

Species: Angelique, Doug Fir, Ipe, Rock Walnut, & Teak

Construction: 1-1/4” wide x 1-1/4” deep slats spaced 3/4” apart, installed on nine 7/8" thick x 1-1/2" wide slats of the same species and finish as the slats. Slat rows are fabricated with one or two pieces per row.

Net Dimensions: 2-1/8" (54 mm) thick x 22" (559 mm) face width x 7' 11-7/8" (2,435 mm) fixed lengths.

Millwork: Surfaced four sides (S4S), square edge.

Finish: Varies by species and/or preference.

Character: Varies by species. See chart below for details.

Species Character
Angelique Very clean with an occasional pin knot.
Doug Fir Mixed grain with surface seasoning checks and tight, loose, and missing knots.
Ipe Very clean with an occasional pin knot.
Rock Walnut Mixed grain with occasional small sound, tight knots.
Teak Insect, fastener and other holes (including mortise pockets) filled with teak and black epoxy and/or black epoxy. Meets TerraMai Select Grade Teak Specifications.

Certifications: FSC Mix 0% to 100% depending on species - FSC-C021798 

Contributes to:LEED V4

Low-Emitting Materials (Possible 3 Points)

Responsible Sourcing of Raw Materials (1-2 Points)