Create amazing spaces of unsurpassed beauty and character with TerraMai’s Exterior Open Panels; reclaimed and sustainable wood slats on cross rails of the same species. Installation is quick, easy, and stays true to your design intent. Our Exterior Open Panels will dramatically reduce your installation time for faster project completion. Exterior Open Panels must be installed on existing cladding or used as divider panels.
Species: Angelique, Coastal Cedar, Rock Walnut, & Teak
Construction: 1-1/4” wide x 1-1/4” deep slats spaced 3/4” apart, installed on nine 7/8" thick x 1-1/2" wide slats of the same species and finish as the slats. Slat rows are fabricated with one or two pieces per row.
Net Dimensions: 2-1/8" (54mm) thick x 16" (406mm) face width x 7' 11-7/8" (2435mm) fixed lengths.
Millwork: Surfaced four sides (S4S), square edge.
Finish: Varies by species and/or preference.
Character: Varies by species. See chart below for details.
| Species |
Character |
| Angelique |
Very clean with an occasional pin knot. |
| Coastal Cedar |
Sound, tight knots of all sizes. |
| Rock Walnut |
Mixed grain with occasional small sound, tight knots. |
| Teak |
Insect, fastener and other holes (including mortise pockets) filled with teak and black epoxy and/or black epoxy. Meets TerraMai Select Grade Teak Specifications. |
Certifications: FSC Mix 0% to 100% depending on species - FSC-C021798
Contributes to:LEED V4
Low-Emitting Materials (Possible 3 Points)
Responsible Sourcing of Raw Materials (1-2 Points)